Summer is here, and that means it’s time to start thinking about ways to save money on your cooling costs. Luckily, there are plenty of easy things you can do to lower your energy bills without compromising comfort or quality.
1. Keep the air filter clean.
You should replace the air filter in your home every three to six months. The most common mistake is to forget about them entirely, but you should also be on the lookout for any specific signs that it’s time to replace your filter.
If you notice any rips or tears in your filters, they need replacement immediately! Rips and tears give pests easy access into your home, so if you see them, throw out the old one and get a new one ASAP.
Also, dirty filters lead directly to dirty cooling coils, which means that dirtier cooling coils lead directly to higher electricity bills! That’s why regular cleaning of your filter (and replacing it regularly) is so important: keeping your air conditioner clean will save money!
2. Schedule preventative maintenance for your cooling equipment.
Schedule preventative maintenance for your cooling equipment, like heating and air maintenance. You can schedule regular maintenance on your AC unit to keep it running at peak efficiency and avoid costly repairs in the future.
Best Brooklyn Heating and AC Repair is the most reliable in your area, so check it out!
3. Make sure your thermostat is working properly.
The first step to saving on your cooling bills is to make sure your thermostat is working properly. Even if it’s been a few years since you’ve last checked, it’s worth taking a second look at the settings, batteries, and wiring before considering any other steps.
Check whether there are any loose connections or frayed wires that could be affecting how well your thermostat works when connected with the rest of its system (and thus causing it not to turn off or on as often as it should).
4. Choose and program a thermostat that works for your lifestyle.
The next step is choosing and programming a thermostat that works for your lifestyle. It should be easy to use, read, program, and also be remotely controllable by phone or voice command. The more options available, the easier it will be to save money on your cooling bills!
5. Set the thermostat at the right temperature.
Setting your thermostat at the right temperature will help you save a lot of money on cooling costs. It is important to set it at a comfortable temperature for everyone in your house, but also make sure not to set it too high or too low. A good rule of thumb is that if you are comfortable, then everyone else should be as well (although this can be different depending on how hot/cold they are).
6. Clean your AC condenser unit regularly.
You may have been told that you should clean the filter of your home’s air conditioner once a month, but if you want to save on cooling bills, you’d be better off cleaning it every few months instead. This is because dust and other debris can build up on the surface of your AC condenser unit, which can block airflow and reduce its efficiency. To keep your system running at peak performance, clean it when you change your air filter. This way, both units will be free and clear with no obstruction between them!
7. Keep vents open, and make sure they are not blocked by furniture or other items.
Keeping your vents open and clear is one of the best ways to keep your home comfortable. If you have vents in unused rooms, keep them open as much as possible for ventilation. If there are rooms that you don’t use on a regular basis, consider closing the vents in these rooms so that air does not get trapped inside and start to circulate hot air.
Keep all vents free of dust and other contaminants (such as pet hair) by cleaning them regularly with a vacuum cleaner attachment or brush attachment.
8. Insulate and seal ducts, but do it right!
A qualified heating and cooling contractor can help you determine if you need to insulate or seal your ducts and how to do it safely, energy-efficiently, and effectively.
You’ve probably heard the term “insulation” associated with heating and cooling systems before, but what does it really mean? Insulation is a material that helps keep heat in or out of a home. There are two main types of insulation:
- Blown-in fiberglass
- Rigid foam board/polystyrene
9. Check your thermostat’s batteries.
There are still thermostats that use batteries. And if you still notice poor performance from time to time (for example: when temperatures reach higher levels than normal), then try replacing old batteries with new ones until things get back on track again!
This obviously does not apply if your thermostat doesn’t use batteries anymore (modern AC thermostats draw power from the home’s electrical supply already).
10. Upgrade or replace inefficient equipment.
If your current HVAC system is not sized correctly for your home, it will run more than necessary to maintain the desired temperature. You can find out how much to upgrade or replace your system by contacting various HVAC companies who can do home heating maintenance as well. It is also important to make sure that you get a qualified contractor to do the work. This will ensure that they do quality work and won’t cut corners.
There are a lot of things you can do to save on cooling costs, but there is one thing that will always be true: your home needs to be properly sealed and insulated. This is where sealing your ducts comes in. You might think it’s just one small step among many others, but if you want to save money on your cooling bills, this is the place where it starts!
Call Best Brooklyn Heating and AC Repair right now! We ensure that you will have the best possible service.